CRT-300 Setup Options
16
Figure 5. Data in Memory Messages
Usually, you will not clear data until after you save it. Cleared data is lost
but can be retrieved from the memory card. If you back up memory card data
to a computer, you can use the BAS program to analyze cell readings.
At the message,
Readings are in temporary storage. Save readings to the
memory card?,
to save the data, press Yes and refer to
Saving to the Memory
Card
.
At
Do you want to erase the readings from temporary storage?,
if you are
certain you want to delete (erase) the readings, press Yes. To not delete,
press No.
7.4
Display
Main Menu > CRT Setup|
|Disp
Use Display to adjust the Cellcorder LCD display. Use the Up/Down Arrows
to adjust contrast, then press Accept.
TIP
: Shift+Disp also accesses Display.
7.5
Sound
Main Menu > CRT Setup|
|Sound
Use Sound to turn the Cellcorder beeper off or on. Use the Up/Down Arrows
to select off or on, then press Accept.
TIP
: Shift+Mute also accesses Sound.
7.6
Frequency
Main Menu > CRT Setup|
|Freq
Use Frequency to have the Cellcorder A/D circuitry filter out the AC line
frequency noise. Use the Up/Down Arrows to select 50Hz or 60Hz, then
press Accept.
TIP
: Shift+Hz also accesses Frequency.
