110
l. Program the Length Range (Maximum/Minimum Lengths) for a Symbology
Note:
If minimum length is set to be greater than maximum length, the engine only decodes barcodes with
either the minimum or maximum length. If you only want to read barcodes with a specific length, set both
minimum and maximum lengths to be that desired length.
Example: Set the engine to decode Code 128 barcodes containing between 8 and 12 characters
1. Scan the
Enter Setup
barcode.
2. Scan the
Set the Minimum Length
barcode. (See the
“Set Length Range for Code 128”
section
in Chapter 7)
3. Scan the numeric barcode
“8”.
4. Scan the
Save
barcode.
5. Scan the
Set the Maximum Length
barcode. (See the
“Set Length Range for Code 128”
section
in Chapter 7)
6. Scan the numeric barcodes
“1” and “2”.
7. Scan the
Save
barcode.
8. Scan the
Exit Setup
barcode. (If you still need to program other parameter/feature, skip this step.)
m. Program the Code Page
Example: Set the code page to Windows 1251 (Cyrillic)
1. Scan the
Enter Setup
barcode.
2. Scan the
Set the Code Page
barcode. (See the
“Code Page”
section in Chapter 2)
3. Scan the numeric barcode
“1”.
4. Scan the
Save
barcode.
5. Scan the
Exit Setup
barcode. (If you still need to program other parameter/feature, skip this step.)