12
The Setup Menu
Time Settings
Timer Mode:
When set to
AUTO
the system’s time
settings will be obtained from the transmission
signal. To set manually use the
/
buttons to
select
MANUAL
.
1. Scroll down to the
DATE
setting using the
/
buttons. Press the
/
buttons to activate the
calendar screen, where you use a combination of
the
/
/
/
buttons to navigate the calendar
until you find the correct date. Press the
ENTER
button to store the date.
2. After scrolling down to the
TIME
setting use the
/
buttons to select the digit you wish to
change. Press the relevant numeric key for the
number you wish to enter. Press either
/
buttons to store the setting.
3.
GMT OFFSET
is only available when the
TIMER
MODE
is set to
AUTO
. Use the
/
/
/
buttons to set your GMT offset zone. Leaving
on
AUTO
sets the zone depending on the
transmission.
4. The
SUMMER TIME
setting is only available
when the
GMT OFFSET
option is set to anything
but
AUTO
. Use the
/
buttons to cycle
between
ON
&
OFF
.
Wake Up Timer Settings
The wake up timer allows you to set a reminder
when a program is about to start, or for timer
recording to a PVR or VCR device.
•
Timer NO:
This allows you to set up to
8
wake
up timers.
•
Timer Mode:
Set to
OFF, ONCE, DAILY,
WEEKLY
or
YEARLY
.
•
Wakeup Mode:
Select from
OFF, MESSAGE,
Configuration
Configuration
CHANNEL
or
ON
.
•
Wakeup Channel:
Select the channel you wish
to view.
•
Wakeup Date:
Use the displayed calendar to
select the date for the wake up operation.
•
On Time:
Sets the time the wake up operation
will start.
•
Duration:
Sets the duration the wake up
operation stays active for.
Example 1:
You are watching a program on BBC1,
but wish to view a program later on BBC2 at
2.30pm which runs for 30 mins.
1. The settings would be as follows:
Timer No
1
TImer Mode
Once
Wakeup Mode
Channel
Wakeup Channel
BBC2
Wakeup Date
11.04.2010
On Time
14:30
Duration
00:30
2. Press the
EXIT
button a number of times to
return to the TV and save the setting you just set.
You can now continue to watch the TV.
3. When the timer reaches the programmed time
the set top box will change to the chosen channel
and display it for the selected duration.
4. When the 30 minutes duration comes to an end
the set top box will revert back to the channel you
where watching prior to the wake up operation.
Example 2:
You wish to make a recording of a