11
default is 6 seconds. Use the
/
buttons to cycle
through the options 1-6 seconds.
OSD Trans:
Controls the translucency of the
interface. Use the
/
buttons to cycle through
the options 10% - 60%.
OSD Language, Audio Language & Subtitle
Language:
Use the
/
buttons to enter the
language selection options. Then use the
/
buttons to select the language you require from
English, Gaelic or Welsh. Press the
ENTER
button
to store the setting.
TV Settings
Aspect Ratio:
This setting controls how the picture
fits the screen depending on the TV used. Press
the
/
buttons to cycle through 16:9, 4:3LB (
letter box ) or 4:3PS ( Pan & Scan ).
Video Output:
Press the
/
buttons to cycle
through the two options of
RGB
or
CVBS
depending on what signal your TV requires.
Brightness:
Use the
/
buttons to enter the
Brightness level options. Then use the
/
buttons to select from
0%
to
100%
. Press
ENTER
to apply the brightness level setting.
Contrast:
Use the
/
buttons to enter the
Contrast level options. Then use the
/
buttons
to select from
0%
to
100%
. Press
ENTER
to apply
the contrast level setting.
HUE:
Use the
/
buttons to enter the Hue level
options. Then use the
/
buttons to select from
-6 to +6.
Press
ENTER
to apply the hue level.
Configuration
Configuration
User Instructions
Saturation:
Use the
/
buttons to enter the
Saturation level options. Then use the
/
buttons to select from
0 to 12
. Press
ENTER
to
apply the saturation level setting.
System Settings
EQ Setup:
The sound can be altered with EQ
presets. Use the
/
buttons to cycle through the
options of:
Standard
,
Classic
,
Rock
,
Jazz
&
Pop
.
Surround:
The surround setting adds a spatial EQ
effect to the sound to simulate an environment. Use
the
/
buttons to cycle through the options of:
Off
,
Concert
,
Church
,
Passive
&
Live
.
LCN:
Means
Logical Channel Number
and
denotes wether the stations are listed by channel
number IE: BBC, BBC2 etc or by station order.
Area:
Set the country location. Use the
/
buttons to select.
Parental Rating:
Restrictions based on age can
be set here by setting an age limit. Any programs
exceeding that age will require the pass code to
view.
When selected a 4 digit pass code is required to
proceed with the function. The default code is
‘
0000
’. You can then use the
/
buttons to select
the age. Press
ENTER
to store the setting.
Auto Standby:
The auto standby function shuts the
unit down into the standby mode when left unused
for 3 hours. Use the
/
buttons to select
ON
or
OFF
.
When set to
ON
you will see a pop up appear
after 3 hours asking if you’d like to stop the auto
standby process. Simply select
NO
and press the
ENTER
button to remain viewing.
Channel Update:
This function keeps channel
listings current if any alterations are made to the
transmission.
OAD Upgrade:
Enabling this option allows
software updates to be applied over transmissions.
The Manual option stops any updates being applied
unless performed manually. Auto allows updates to
be applied when the unit is on or in standby mode.