Introduction
The AL-IR1 is optically linked to the T3/T3E Series Locks via
infrared light. It is used for reading the various reports main-
tained by the locks, including the Audit Log.
Specifications
•
Dimensions: 3½" W x 7"L
•
Interface: Infrared Light Beam
•
Activation: Refer to Lock Instructions
•
Distance: 1" to 4" above the infrared LED
•
Controls: 3 (Power On/Off, printer Contrast and Paper Feed)
•
Paper: Uses common 2¼" thermal paper available at most
office supply stores (supplied)
•
Batteries: 4 "AA" 1.5 volt alkaline batteries (supplied)
•
AC Adapter (Optional): 9-12V AC or DC 500-1500mA,
Hewlett Packard HP82241A or equivalent
AL-IR1
WIRELESS PRINTER
OPERATION INSTRUCTIONS
OI233B 9/04
Operation
!
Turn on the printer.
!
Activate printer mode on lock (see lock instructions).
!
Place AL-IR1 approximately 1" to 4" above the infrared
LED (as shown in image).
!
Turn off the printer when not in use.
NOTE:
Press the Paper Advance button or turn off the
printer and on again, if printer has been not been in use for a
long time.
AC
Adapter
(Optional)
Paper Compartment
Thermal
Print Head
On/Off
Contrast
Paper
Advance
Power ON
Indicator
Light
Infrared
LED
Infrared
Receiver
AL-IR1 to DL3000 (side and front views)
Optical
Receiver
345 Bayview Avenue
Amityville, New York 11701
For Sales and Repairs 1-800-ALA-LOCK
For Technical Service 1-800-645-9440
Publicly traded on NASDAQ Symbol: NSSC
© ALARM LOCK 2004