Alarm Controls Corporation APS-300 Series, Installation Manual

Page: 8 / 8

PD4C Power Distribution Modules
Alarm Controls Corporation
19 Brandywine Drive
Deer Park, NY 11729
500-33325_A Installation specifications subject to change without notice
Phone: (800) 645-5538
info@alarmcontrols.com
www.alarmcontrols.com
Page 1
PD4C
Multi Output
Low Voltage Power Distribution Modules
Life Time Warranty
Features/Specifications:

Converts a single AC or DC (12 or 24v) Input to 4 PTC protected
outputs

Off/On switch disconnects load from output

PTC circuit breaker ratings are holding current at 130oF per
UL Standards

Main Power Green/Red LED Indicates AC, DC or Reversed DC
Input on PD4C

Each output has a green status LED indictor

Current Draw is 6ma max per LED

Circuit Breaker Models with Rated Output 1.42 Amps or below
are Power Limited

All Input Terminal blocks and output terminal blocks on the
PD4C module are rated 40A with a wire range of 10 – 18AWG

Output Terminal blocks on the PDB4C are rated 10A with wire
range 16-30AWG

Size: PD4C 3 3/4”H x 2 1/4”W x 1”D Mounting: 3 7/16”H x
1.7/8”W
PD4C
4 PTC Circuit Breaker Outputs with status LED’s with
700mA fuses
PD4C
UL 294 – Access
Control System Unit
UL 603 – Power
Supplies for Use with
Burglar-Alarm
Systems
ULC S318-96 – Power
supplies for Burglar
Alarm Systems
ULC S533-02 –
Standard for Egress
Door Securing and
Releasing Devices