GB
16
443446_a
Transport
Malfunction
Cause
Remedy
Cutting blade gets hot.
Smoke development.
No oil on the cutting blade.
1. Switch off the appliance.
2. Clean and oil the cutting
blade.
■
Cutting blade is blunt.
■
Nicks in the cutting blade.
Contact one of the manufactur-
er's service centres.
Branches are not cut off
cleanly. Branches often jam
in the cutting blade.
Cutting blade is blunt.
Contact one of the manufactur-
er's service centres.
Sliding play of the cutting blade
is too large.
Contact one of the manufactur-
er's service centres.
Motor running, but the cut-
ting blade does not move.
Appliance fault
Contact one of the manufactur-
er's service centres.
Appliance vibrates unusual-
ly.
Appliance fault
Contact one of the manufactur-
er's service centres.
Further malfunctions
See "Multitool MT 130 – basic appliance" operating instructions.
9
TRANSPORT
Perform the following measures before transport-
ing the appliance:
1. Switch off the appliance.
2. Push protective cover onto the cutting blade.
3. Separate basic appliance, shaft extension (if
used) and attachment from one another.
10 STORAGE
Thoroughly clean the appliance after each use
and – if present – attach all covers. Store the ap-
pliance in a dry, lockable place out of the reach of
children.
Carry out the following jobs before intervals in
work lasting for longer than 30 days:
■
Clean the cutting blade and spray with rust-
proofing oil.
■
Thoroughly clean the appliance and store it in
a dry place.
11 DISPOSAL
■
Packaging, equipment and accesso-
ries are made from recyclable materi-
als, and must be disposed of accord-
ingly.
12 AFTER-SALES/SERVICE
In the event of questions of warranty, repair or
spare parts, please contact your nearest AL-
KO Service Centre. These can be found on the
Internet at:
www.al-ko.com/service-contacts
13 GUARANTEE
We will resolve any material or manufacturing faults on the appliance during the legal warranty period
for claims relating to faults, in accordance with our choice either to repair or replace. The legal warran-
ty period is determined by the legislation of the country in which the appliance was purchased.
Our warranty promise applies only if:
■
These operating instructions are heeded
■
The appliance is handled correctly
■
Original spare parts have been used
The warranty becomes void in the case of:
■
Unauthorised repair attempts
■
Unauthorised technical modifications
■
Non-intended use
Summary of Contents for Solo 130 MT-A
