443277_b
33
Help in case of malfunction
Required oil grade and quantity: see Technical
Data.
1. Move the cultivator to working position.
2. Unscrew plug (38/1) on the right-hand side of
the gearbox.
3. During oil changes: Drain the old oil into a
suitable vessel.
4. Pour in new oil until it is visible in the oil filler
neck.
5. Screw plug (38/1) firmly into the oil filler neck
again.
6. During oil changes: Dispose of used oil in ac-
cordance with the statutory regulations.
NOTE
The oil must be visible at the filler
opening.
7.3
Maintaining the spark plug
NOTE
For more detailed information, please
refer to the separate operating instructions for the
engine.
7.4
Air filters
NOTE
For more detailed information, please
refer to the separate operating instructions for the
engine.
7.5
Motor oil change
NOTE
For more detailed information, please
refer to the separate operating instructions for the
engine.
7.6
Adjusting Bowden cables
The fine adjustment is made using the adjusting
bolt on the handlebar and on the engine mount.
1. Unfasten the lock nut on the adjusting bolt.
2. Turn the adjusting bolt to lengthen or shorten
the Bowden cable.
3. Re-tighten the lock nut.
NOTE
The cultivator blades may begin to
turn when the lever is only pressed halfway up.
Throttle cable
NOTE
For more detailed information, please
refer to the separate operating instructions for the
engine.
8
HELP IN CASE OF MALFUNCTION
NOTE
For malfunctions that are not listed in
this table or that you cannot resolve yourself,
please contact our customer service.
Malfunction
Cause
Remedy
Engine loses power.
Air filter clogged
Check and clean air filter
Combustion problems
Contact a service centre
Cultivator blades dirty
Clean the cultivator blades
Engine does not start.
Lack of fuel
Top up with fuel
Poor quality, contaminated
fuel, old fuel in tank
Empty tank and fill with fresh fuel
Incorrect starting procedure
Perform the starting process correctly
Throttle lever in the wrong
position
Move the throttle lever to the "START"
position
Defective spark plug
See instructions for the engine.
Air filters
See instructions for the engine.
Cultivator blades do not
turn
V-belt defective
Contact a service centre
Gearbox damage
Contact a service centre
Cultivator blade loose
Tighten the cultivator blade
Bowden cable stretched or
loose
Adjust Bowden cable
