AL-KO Easy Crush LH 2800, Instructions For Use Manual

Page: 21 / 180

EU declaration of conformity
440558_b 21
Malfunction Possible cause Solution
Materials to be shredded
are not properly cut.
Counterplate in the cutting unit not
correctly adjusted.
Readjust counterplate, see "Read-
justing the counterplate".
Motor switches off. Motor protection switch switched
off due to cutting drum overload or
blockage.
The motor can be switched on
again after a cool-down phase of
approx. 5 minutes.
Unusual noises.
Rattling on the machine.
Screws on the motor, its mount or
the carriage are loose.
Re-tighten screws.
ADVICE
If you encounter any malfunctions that are not listed in this table or which you cannot rectify
yourself, please contact our responsible customer service.
EU DECLARATION OF CONFORMITY
We hereby declare that this product in the version introduced into trade by us, complies with the requirements of the harmonised EU Di-
rectives, EU safety standards and the product-specific standards.
Product
Drum shredder
Manufacturer Duly authorised person
Type
Easy Crush LH 2800
AL-KO Geräte GmbH
Ichenhauser Str. 14
D-89359 Kötz Andreas Hedrich
Ichenhauser Str. 14
D-89359 Kötz
Serial number
G2052058
EU Directives Harmonised standards
Sound power level
EN ISO 3744
measured / guaranteed
87 / 90 dB(A)
2006/42/EC
2000/14/EC
2004/108/EC
2006/95/EC DIN EN 55014-1
DIN EN 55014-2
DIN EN 13683
DIN EN 62233
DIN EN 60335-1
DIN EN 61000-3-2
DIN EN 61000-3-11
Fpr EN 50434
Named position Conformity evaluation
Société Nationale de Certification et
d'Homologation
2a Kalchesbruck
L-1852 Luxembourg 2000/14/EC
Appendix V Wolfgang Hergeth
Managing Director
Kötz, 08.10.2014