AL-KO BMP 14001, Translation Of The Original Instructions For Use

Page: 18 / 144

GB
18 BMP 14001 | BMP 30000
Product description
IMPORTANT! Denotes a situation which can
result in material damage if not avoided.
NOTE Special instructions for ease of un-
derstanding and handling.
2 PRODUCT DESCRIPTION
IMPORTANT! Danger of damage to the
pump! If a pre-filter is not installed, solids can
enter the pump and cause damage.
■
Install a pre-filter in the suction line for safe
operation of the pressure switch.
2.1 Intended use
The pump is intended for private use in house
and garden. It may only be operated within the
framework of the operating limits indicated in the
technical data.
The pump is suitable for:
■
Watering and irrigating
■
Re-pumping and pumping out of vessels (e.g.
swimming pools)
■
Removing water from fountains, rain barrels,
and cisterns.
The pump is suitable only for conveying the fol-
lowing fluids:
■
Clear water, rainwater
■
Water containing chlorine (e.g. swimming
pools)
Any use not in accordance with this designated
use shall be regarded as misuse.
2.2 Possible misuse
The pump must not be operated continuously. It
is not suitable for conveying:
■
Drinking water
■
Salt water
■
Foodstuffs
■
Waste water
■
aggressive media, chemicals
■
corrosive, flammable, explosive or fuming flu-
ids
■
fluids that are hotter than 35 °C
■
water containing sand and abrasive fluids.
2.3 Symbols on the appliance
Symbol Meaning
Pay special attention when handling
this product.
Read the operating instructions be-
fore starting operation.
Danger - poisonous gases!
Allow the appliance to cool down
before refuelling.
Do not operate in enclosed spaces.
Danger of fire! Pay special attention
when handling petrol!
Wear ear protection!
Hot surface. Do not touch!
2.4 Scope of supply
The garden pump is supplied ready-to-use, with
filter, sleeve and operating instructions.
2.5 Product overview (01 - 04)
No. Component
1 Tank lid for the petrol tank
2 Spark plug connector
3 Silencer
4 Water filler plug
5 Pump outlet/pressure line connec-
tion
6 Pump inlet/suction line connection