Subject to changes in line with technical progress.
17
3420878
Product description
The compact air handling unit can also be operated with the control unit removed in a time program or via a presence
detector.
In both cases, malfunctions are signalled by the red LED status display installed on the air handling unit. However, to be
able to determine the corresponding causes of malfunctions, the control unit must be connected to a display.
3.1.7 Remote access portal
The compact air handling unit can also be optionally monitored and set remotely via the AL-KO THERM GmbH remote
access portal
https://remote.al-ko.com/
for example, a PC, a notebook or a tablet.
In addition to the digital twin of the mobile control unit, the AL-KO THERM GmbH remote access portal offers functions
such as historical recording of alarms and data points, a plant diagram and automatic notification by e-mail for alarms.
3.1.8 HMI for web
With the
HMI for web
the entire installation can be fully set and commissioned according to the logged-in password
level.
HMI for web
is the standard equipment of the control. The function can be accessed via the network connection
of the control via an on-site terminal (PC, notebook, table) via web browser. Menu structure and password level are
identical to the control unit.
3.1.9 Network connection
Both the AL-KO THERM GmbH remote access portal and
HMI for web
are connected to the compact air handling unit via
a network connection. This is located above the main switch.
3.1.10 Connection for building management system
The control system of the compact air handling unit can be integrated into the building management system (BMS) via
Modbus or BACnet using an optional bus module.
