AK-QIR-01B - user manual
p. 3
Problem
Cause
Solution
A device connected via
adapter qi does not
charging
No mains voltage
ź
Check the mains fuses
ź
Check the correct connection of
the adpater to the mains socket
Bad phone position
ź
Place the phone directly on the
charging surface
ź
Place the phone with the back
side in the center of the
charging surface
ź
Do not charge your phone close
to intense magnetic field
sources
There is a suspicion of a
product defect
ź
Stop using and contact with
seller
Slow charging process
Bad adapter position
ź
Place the adapter directly on
the charging surface
ź
Do not charge your phone close
to intense magnetic field
sources
Too long distance
between the chager and
the phone
ź
Take off the case
ź
Place the phone with the back
side in the center of the
charging surface
ź
Do not place any objects
between the charginng surface
and the phone while charging
ź
Clean the charging surface and
back side of the phone
Removing the most common problems
adapter QI
Adapter assembly
3. Gently tilt the adapter so that it is on the back of the device.
4. Make sure that adapter fits in back cover. If not, you can place adapter in device case.
1. Make sure that the adapter has plug in corresponding type with your device. The socket
must be compatible with adapter’s plug, so that after installing adapter in the device you
can put it on the back of the device.
2. Place the adapter’s plug in device’s socket.
Type clasification
ź
Type A - narrower side of USB port is directed up towards
the screen.
ź
Type B - wider side of USB port is directed down towards
the back cover.
Type A
Type B
Screen
Screen
Back cover
Back cover
