Akuvox X933H Manual Download

Page: 104 / 130

X933H Administrator Guide

AKUVOX SMART INTERCOM www.akuvox.com

Auto-provisioning is a feature used to configure or upgrade the devices in

batch via third party servers.

DHCP, PNP, TFTP, FTP, HTTPS

are the

protocols used by the Akuvox intercom devices to access the URL of the

address of the third-party server which stores configuration files and

firmwares, which will then be used to update the firmware and the

corresponding parameters on the door phone.

Please see the flow chart below:

20.2.Introduction to the Configuration Files for

Auto-Provisioning

Configuration files have two formats for the auto-provisioning. one is the

general configuration files used for the general provisioning and other one is

the MAC-based configuration provisioning.

Summary of Contents for X933H


































































































































Search results

Summary of Contents for X933H

Reviews:

Related manuals for X933H

Brands by name

Popular brands

Akuvox X933H, Manual

Search results

Summary of Contents for X933H

Reviews:

Related manuals for X933H

Brands by name

Popular brands