Akuvox A01, Admin Manual, Page: 33 / 51

A01 Access Control Admin Guide
AKUVOX SMART INTERCOM www.akuvox.com 27
Maintenance > System Log interface.
Parameter Set-up:

Log Level : select log levels from 1 to 7 levels. You will be instructed by
Akuvox technical staff about the specific log level to be entered for
debugging purpose. The default log level is 3 , the higher the level is 5 , the
more complete the log is 7 .

Export Log : click th e Export tab to export temporary debug log file to a
local PC.

Remote System Log Enabled : select Enable or Disable if you want to
enable or disable the remote system log.

Remote System Server : enter the remote server address to receive the
device log . And the remote server address will be provided by Akuvox
technical support.
15.2.PCAP for Debugging
PCAP in A01 access control terminal is used to capture the data package
going in and out of the devices for debugging and troubleshooting purpose.
You can set up the PCAP on the device web System > Maintenance > PCAP
interface properly before using it.