GETTING STARTED
1.
Please read the safety section (page 2) in the main instructions before proceeding further. This section
contains vital information to ensure safe positioning and use of the TV
2.
Unpack the TV and place on a flat level surface suitable to support the weight of the TV (4.5 kg approx.).
3.
Connect the aerial into the TV Tuner connector at the left side of the TV (Fig 1).
Fig.2
Fig.3
4. Connect the mains power lead to the Power Input socket at the rear of the TV, (Fig 2) Plug
in and switch on at the mains. The LED indicator on the TV will illuminate and show red
(Fig 3).
5.
Open the battery compartment cover (Fig 4) on the reverse of the remote control. Insert 2 x
AAA 1.5V alkaline batteries in accordance with the diagram in the battery compartment.
Take care to observe the correct polarity (+/-).
6.
Press the POWER button (Fig 5) to turn the TV set on. The LED indicator will turn green
and after a few seconds, the screen will activate and the first time installation menu (Fig. 6)
will appear.
7.
Use the cursor
▼
/
▲
buttons on the remote control to move up and down the display to
highlight desired options.
8.
The default language is “English” if you want another language select that language using
the
►
/
◄
buttons. Use the
▼
/
▲
buttons to select “COUNTRY” and use the
►
/
◄
buttons to
select another country if required. (If using in the Rep of Ireland, select Belgium). Use the
▼
/
▲
buttons to select “Tune Type” and use the
►
/
◄
buttons to select either ATV, DTV or
ATV-DTV. (ATV-DTV is default. If using in the Rep of Ireland, select ATV).
9.
Press Ok. Fig 7 will be displayed. The TV will now search the entire UHF range for both
Digital and Analog TV stations. When search is complete the TV will display the first
channel (BBC1) in DTV mode. To view a list of received stations press “MENU” and select
“Programme Edit” , “Fig 8”. The Analog stations may not be in the correct order, see page13
in the Main Instruction book for more information.
10.
To select a channel either enter the number of the channel using the number buttons on the
remote control or scroll through the channels using the channel CH+/- buttons.
11. To view analogue TV channels press the SOURCE/INPUT button to display the source
menu “Fig 9”. Using the cursor
▲
/
▼
buttons highlight TV on the menu and press OK to
select. To view digital TV channels select DTV on this same menu.
Fig.4
Fig 1
Fig.6
Fig.7
Fig.8
APL2YR2668FDU
MSD306
Quick Start Guide
Fig.5
Fig.9
12.
Adjust the volume to the desired level using the volume button on the TV or Remote control. The sound can be
silenced by pressing the MUTE button on the remote control and a mute symbol will appear on the screen. Press the
MUTE button a second time to restore the sound.
13. To switch off the TV for short periods, press the POWER button. The TV will go into standby mode and the LED
indicator will change to red. If not using the TV for extended periods turn off at the mains switch to conserve
electricity, all settings will be retained.
For advanced operation of this TV please consult the Instruction Manual.
Should you have difficulty in operating this unit, please consult the Trouble Shooting Guide in the Instruction Manual.
If you suspect a fault, please contact the Customer Help Line.
