275g001e_SC5010_HS_ES_3rd ed.docx
2022-01-11
Page 8 of 22
7.4
Electric actuators and control unit
The SC 5010 HS / ES is powered by low voltage actuators. The electronic control unit is located in the
lower frame section under the cover.
7.5
Handheld control panel
The hand held control panel is connected with a helix cable to the control unit under the cover on
the lower frame. To hook up the panel at any desired position use the hook on the backside. Make
sure however that the helix cord is not exposed to squashing or pinching by any moving parts of the
chair.
Chair Up - Down
Foot rest Up - Down
Seat tilt Up - Down
Head rest Up - Down
Shock Position
(Trendelburg)
Back rest Up - Down
Memory: Store Data
Memory: Recall Data (M1-M6)
Power LED
Capacity LED