
7
SPECIFICACTIONS
ITEM
OUTPUT LEVEL:
CHANNEL BALANCE:
THD+N(*1):
S/N RATIO(*2):
L/R SEPARATION(*2):
DYNAMIC RANGE(*2):
FREQUENCYRESPONSE:
TYPICAL
2V +/-0.5dB
WITHIN 0.5dB
0.006%
100dB
100dB
93dB
17-16KHz +/-0.2dB
LIMIT
2V +/-1dB
WITHIN 1dB
0.02%
90dB
90dB
85dB
17-16KHz +/-1dB
CONDITION
1KHz, 0dB (TCD-782 TRK.2)
1KHz, 0dB (TCD-782 TRK.2)
1KHz, 0dB (TCD-782 TRK.2)
1KHz, 0dB (TCD-782 TRK.2, 8)
1KHz, 0dB (TCD-782 TRK.9,11)
1KHz, -60dB (TCD-782 TRK.18)
(TCD-781 TRK.1,4 & 16)
ENGLISH
Notice:
1- Manual BPM:
2-Auto BPM:
Note
REPEAT
RESET
CONTROLVERSION DISPLAY
Switch Manual BPM on just need one touch the
button. Switch Auto BPM on by pressing the “TAP
BPM” button more than 1 sec. and then the LCD
will display “AUTO BPM”.
Following the music tempo and press the “TAP
BPM” button to count BPM value; from the auto
BPM to manual mode, the value won’t change
until the correct BPM value is counted.
Counting BPM value automatically without pressing “TAP BPM” button.
In AUTO BPM mode the SD2DIGITAL player will automatically analize the track Beat and will
depict the value at the Display without need of taping the TAP BPM knob.
Press the TIME BUTTON for 2 sec. until
"PRESET " is displayed.
: System setting will be closed
automatically when more than 5 sec no function.
Turn the TRACK KNOB to scroll through the
different submenus including: REPEAT, Reset
all, and, FIRMWARE VERSION.
You can adjust the setting by stopping on the
desired submenu and pushing the TRACK
KNOB. To exit the menu settings press the
TIME BUTTON again.
“REPEAT: OFF” –You can play the track in the different folder.
“REPEAT: ON” –You can’t play the track without in the playing folder.
In the ” Reset all?” section, you may reset the system memory. This will reset all your programmed
menus and restore the unit to its default settings. Press the TRACK knob will return all function setting
to default value automatically and then "reset OK" will display in the LCD.
You can view the units firmware version. “V cc.bb”, cc is for the controller version, bb is for the buffer
version.
SYSTEM SETTING
MODEL:
POWER SOURCE:
DIMENSIONS:
WEIGHT:
AUDIO CHARACTERISTICS
(LOAD: LINE=100Kohm, TEST SIGNALFORMAT: MP3,128Kbps)
AT YOUR SD2DIGITAL
SD2DIGITAL, Dual SD Card MP3 Player
DC 6V, 1.5A
482 (W) x 88 (D) x 120.4 (H)mm
1.8 kgs
NOTES:
*1: WITH 20KHz LOW PASS FILTER.
*2: WITH 20KHz LOW PASS FILTER, "IHF-A" WEIGHTED.
SD DIGITAL Player
SD2DIGITAL
2
BOX YOU WILL FIND:
-
-
Manual
- SD Card
- Switching adaptor
- RCA audio cables