Akiyama Acorde, User Manual, Page: 7 / 14

5
MANTENANCE
MAINS CONNECTION AMPLIFIER CONNECTION
ENGLISH
MAINTENANCE
A-
B-
-
-
-
Cleaning the stylus: A dirty stylus will cause noise and poor sound quality. Use a stylus cleaning kit and brush off the dirt in the direction of the arrow.
Do not brush in the opposite direction or from side to side, since this can damage the stylus.
Replacing the stylus: When the sound quality drops, replace the stylus with a new one. Remove the old stylus by pulling it downwards gently, and push the new stylus into place as shown.
Maintenance of external surfaces
Use a polishing cloth or dry cloth to wipe off dust and dirt.
When the surfaces are very dirty, wipe with a soft cloth dipped in some neutral cleanser diluted five or six times
Never use thinners, benzene, insecticide sprays and oth
:
Ensure that the mains voltage of your home corresponds to the operating voltage of the unit. Your
unit is ready to be connected to a correct voltage of your location. Ensure that the mains voltage of your home corresponds to the operating voltage of the unit. Your
unit is ready to be connected to a correct voltage of your location.
Connect audio plugs to magnetic record player input on your a mplifier:
Red plug into R/H channel input.
White plug into L/H channel input.
- Place the record of your choice on the turntable. If it is a 45 rpm, do not forget to place the
adaptor on the record spindle.
- Choose the desired playing speed:
33 rpm -> button unlocked
45 rpm-> button locked.
- Release the pick-up arm clip.
- Place the cartridge vertically over the first track of the record the turntable starts turning.
- When the record is over, the pick-up arm returns to its rest , the turntable stops turning
Push the lift button close latch to secure pick-up arm
Connect audio plugs to magnetic record player input on your a mplifier:
Red plug into R/H channel input.
White plug into L/H channel input.
- Place the record of your choice on the turntable. If it is a 45 rpm, do not forget to place the
adaptor on the record spindle.
- Choose the desired playing speed:
33 rpm -> button unlocked
45 rpm-> button locked.
- Release the pick-up arm clip.
- Place the cartridge vertically over the first track of the record the turntable starts turning.
- When the record is over, the pick-up arm returns to its rest , the turntable stops turning
Push the lift button close latch to secure pick-up arm
ESPAÑOL
A B