Akiyama Acorde, User Manual, Page: 4 / 14

REAR PANEL FEATURES
FRONT PANEL FEATURES
TOP PANEL FEATURES
3
ENGLISH
1
2
3
.
.
.
AC power cord
POWER ON / OFF SWITCH
RCAAUDIO OUTPUT CABLES
This power cable should be plugged into a wall receptable,After all audio connections are made.
Turns ACORDE on or off.
These cables should be plugged into the audio inputs of your home stereo system.
.
Note: you can still copy records to your USB device or SD card, even, if the audio outputs of the
turntable are not connected to a stereo system
1. Connect a USB device or SD CARD with MP3 files to the USB slot or SD CARD slot respectively. The
LCD will show “USB READ” or CARD READ” when it is properly connected, and USB or SD CARD
will be shown in the upper right corner.
1. Connect a USB device or SD CARD with or with out MP3 files to the USB slot or SD CARD slot
respectively. The LCD will show “USB READ” or CARD READ” when it is properly connected, and
USB or SD CARD will be shown in the upper right corner.
2. The LCD will display the total number of folders on the device
(on the left) and the total number of available tracks (on the right).
Use the TRACK buttons to move throught the tracks.
You can also press NEXT FOLDER buttonto jump to first track of
the next folder. The current track will begin playing.
2. If the device already contains Mp3s, the display will shows the
total number of folders on the device (on the left) and the total
number of available tracks (on the right)
3. The LCD will show the PLAY icon, the track number an the time
elapsed.
- To skip to another track, use the TRACK
buttons. The
Display will briefly show the number of the folder and the new
track.
- To pause playback, press the PLAY/PAUSE button.
- To stop playback, press the STOP button
- To switch how ACORDE plays the tracks, press the PLAY
MODE button:
Repeat
RepeatAll
Repeat Folder
Random
, the current track will repeat.
, the entire collection of tracks will repeat.
, the collection of tracks in the current folder will
repeat.
, All the tracks in your connecte device will play in
3. Cue up the music you want to record from a record on the
PLATTER.
4. To eject the device, first stop the current track by pressing STOP
button. If your device is a USB drive, gently pull it from the slot. If
your device is an SD CARD, push it into the slot until it clicks,
then gently remove it.
4. Press RECORD. The display will show “LOADING”. When
the PLAY/PAUSE icon and time display are flashing on the LCD,
ACORD is ready to record.
5. To begin recording. press PLAY/PAUSE. Items on the LCD will
flash briefly and “REC” will be shown to indicate ACORD is
recording. The display will show the track number and the time
elapsed.
- To start a new track immediately without stopping the recording
process, press SPLIT TRACK. The currently recording track will
stop and a new recording will begin.
- To stop recording, press the STOP button. Tha LCD display will
show “USB READ or “CARD READ” to show it is rescanning the
connected device for your new tracks.
Note: Tracks that are split will be given sequential track numbers
and stored in the same folder.
6. After stopping the recording, you may play new tracks or eject
your device. To eject the device, first stop the current track by
pressing the STOP button. If your device ia a USB drive, gently
pull it from the slot. If your device is an SD card, push it into the
slot until it clicks, then gently remove it.
6
7
8
9
10
11
.
.
.
.
.
.
Press button for 45 rpm. Depress button for 33 rpm.
33 / 45 SPEED BUTTON
LCD
PLAY / PAUSE
STOP
TRACK
REC
This button controls the RPM of the turntable motor.
Shows information pertinent to unit operation.
Press this button to play. While playing, press again to pause. While paused, play again to resume
playback.
Press this button to stop playback or recording.
Skips to the previous track or next track. Press and hold the button down to rewind or fast forward
throught the currect track.
Press this button to enter record mode. Record Mode allows you to record music from the turntable platter
4
5
.
.
USB SLOT
SD CARD SLOT
Insert USB Pendrive or connect USB hard disk (FAT16 or FAT32 only) to this input.
Insert SD card into this slot until it clicks. To eject it, push it in once until it clicks, then remove it from
the slot.
SD: 64MB - 2GB ; SDHC: 4GB - 16GB.
USB: 1.1, support 64MB - 16GB.
Note: ACORDE does not support USB hubs
Note: ACORDE can only recognize one connected device (USB drive or SD card) at a time
E
NGLISH
4
PLAYING MP3s FROM A DEVICE
12
13
14
15
.
.
.
.
NEXT FOLDER
PLAY MODE
Repeat
Repeat All Repeat Folder
Random
SPLIT TRACK
ARM ELEVATION SYSTEM
Press this button to skip to the next folder on your connected device and play the first available MP3 in
that folder
Press this button to select how ACORDE will play the tracks: , the current track will repeat.
, the entire collection of tracks will repeat. , the collection of tracks in the
current folder will repeat. , All the tracks in your connecte device will play in random order.
When recording to your connected device, you can press this button to create a new track. The new track
number will be one higher than the previous one and saved to the same folder on your device.
Raises and lowers the tone arm.
RECORDING MP3s TO A DEVICE