QUICK
START
GUIDE
HC
644
Read
carefully before use
HC
644 Mounting
HC
644 Positioning
Adapter
Mounting
Cleaning
Put the microphone on as
shown above.
Bend the gooseneck so
that the microphone will
sit to one side in front of
the corner of your mouth.
Should you hear excessive
pop noise (”p” and ”t” sounds
are overemphasized
unnaturally), move the
microphone capsule further
away from your mouth (up
or back).
If the microphone sounds
”thin” or flat, move the
microphone capsule closer to
your mouth
Download cutsheet with technical details from:
www.akg.com
This product conforms to the standards listed in the
Declaration of Conformity.
F
or CE certifica
tes contact: [email protected]
Printed in EU
01/17/5081516_B
• To clean the microphone
surface, use a soft cloth
moistened with water.
• Clean the foam
windscreen in mild soap
suds. You can use
the windscreen again as
soon as it has dried.
