DRIVING INSTRUCTION
REMOTUS BC7400 USA
Variant 1 (variant 2, see page 4)
MANUAL BC7400 No. 926137-000 USA
Version: A0 Approved by: HH
Page 1 (11)
TRANSMITTER ON
Pull out the stop button and the transmitter is switched on. The
operation indicator lamp (STATUS) starts blinking and the
transmitter is on.
MAIN CONTACTOR ON
Then the transmitter is on press the
•
. This activates the
Main Contactor in the receiver (the Main Contactor of the telpher)
and the telpher is ready for operation.
NORMAL RUN
The transmitter is designed with two pushbuttons for UP/DOWN
and two for FORWARD/BACKWARD. Each button is divided into
2 steps (a perceptible resistance), which facilitates the running at a
certain speed. The first speed is obtained when the pushbutton is
half compressed and the second speed is obtained when the
pushbutton is totally compressed.
All the motions can be run simultaneously and the motions stop
when the pushbutton is released,
otherwise make an QUICK STOP
.
MANUAL BC7400 No. 926137-000 USA
Version: A0 Approved by: HH
Page 2 (11)
