ROI Series Mini-Converter v1.5r1 31 www.aja.com
X, Y, W, H
The currently calculated Input Region of Interest position (X,Y) and size (W,H) are
displayed here. These values are grayed out and cannot be adjusted. Once the
values are applied, they can be adjusted on the Input tab.
Apply
Click on the Apply button to transfer the current Input Region of Interest
dimensions to the Input screen.
Genlock Screen
The Genlock screens vary depending on the ROI model.
ROI-HDMI and ROI-DVI Genlock Screen
Genlock
The Genlock control offers the following options:
• Auto – use Ref Input if present, then Input signal if valid, then free-run
• Free-run – Lock to internal clock
• Ref In – Lock to the Video Reference input
• HDMI – Lock to the HDMI/DVI Input (if valid video rate)
NOTE: When HDMI is selected, ROI can lock to input formats that have a SMPTE raster
and frame rate and are within 50 ppm of the SDI output format.
NOTE: The actual resultant Genlock status is reported to the right of the selection
menu.
