OG-Hi5-4K-Plus 3G-SDI to HDMI 2.0 Converter v1.0 25 www.aja.com
Gamut
Select a button to set the gamut values to BT.2020 or DCI-P3 D65, or set the
values individually to your custom value.
Choose from the following:
• BT.2020 (preset values per ITU BT.2020)
• DCI-P3 D65 (preset values per DCI-P3 Cinema)
• Custom (allows for defining specific custom coordinates)
Audio Tab Screen
Click on the Audio tab to view and make changes to the OG-Hi5-4K-Plus audio
settings.
NOTE: When using the DVI video protocol, no audio is output since that protocol is video
only.
Input Source
Choose which embedded audio channels are routed to the HDMI output. Eight
channels are routed at a time. You can choose Ch 1-8 or Ch 9-16 from any of the
SDI inputs.
Output Channel Count
Choose Auto, 2 of 8 Channels, or 8 Channels embedded audio. Choosing
“Auto” automatically selects the audio channels based on the attached device’s
capabilities.
Audio Offset In Frames
Permits time shifting the embedded audio in relationship to the video (for
example, to correct for lip sync problems), in 1/16 of a frame increments. Range is
from -0.8125 video frame to +7.0 video frames. The actual time duration of delay
will vary depending on the frame rate of the format being converted.
Setup Tab Screen
Click on the Setup tab to view and make changes to the card name or to restore
card settings to factory default values.
