OG-12GM openGear Card v1.0.2r1 5
www.aja.com
• Two slots required for each card
• Compatible with OG-X-FR, OG-3-FR, and DFR-8321 openGear frames
• Five-year warranty
DashBoard for openGear
DashBoard by Ross Video is used to work with openGear cards and frames. Use
DashBoard as part of the configuration process of OG-12GM during setup of the
system integration.
OG-12GM Simplified Block Diagram
Figure 1. OG-12GM Block Diagram
SDI Input 1
SDI Receiver
SDI Input 2
SDI Input 3
SDI Input 4
SDI Receiver
SDI Receiver
SDI Receiver
SDI
Processing
SDI Transmitter
SDI Output 1
SDI Output 2
SDI Output 3
SDI Output 4
SDI Transmitter
SDI Transmitter
SDI Transmitter
Control
DashBoard
I/O Connections for OG-12GM
Figure 2. Rear View of OG-12GM Card Connectors
SDI Input 1
BNC (J1)
SDI Input 2
BNC (J2)
SDI Input 4
BNC (J4)
Reserved
SDI Output 2
BNC (J8)
SDI Output 4
BNC (J10)
SDI Input 3
BNC (J3)
Reserved
SDI Output 1
BNC (J7)
SDI Output 3
BNC (J9)
LED Indicators
LEDs on the front (near door) of the card indicate the presence of power and the
type of signal detected on the SDI inputs as follows (from top to bottom):
Power LED
The Power LED indicates the state of the card as displayed in DashBoard. When
power is present, it can be green, yellow or red.
• Green: no DashBoard card state alarm is present.
• Yellow: a yellow DashBoard card state alarm is present. See DashBoard for
more information.