42
SDI Output Screen
The SDI Out screen shows the current settings for the two SDI outputs. If an input/output has
no video, it will be indicated on the block diagra
m
(“No Video”).
AJA Control Panel, SDI Out Screen
SDI Output Screen Settings
Infor
m
ation that can appear includes the following ite
m
s. You can view the current setting or
use a pulldown
m
enu to select:
Primary
—when selected, this indicates that an SDI output (SDI Output 1 or SDI Output 2) is
set to the sa
m
e for
m
at as the fra
m
ebuffer. That value will be listed in blue.
Secondary
—when selected, this indicates that the SDI output is set to a for
m
at different fro
m
the fra
m
ebuffer (Pri
m
ary For
m
at). That secondary for
m
at value will be listed in green.
This shows that active processing of the video is taking place (for
m
at change and
possibly down-conversion).
USO
RESTRITO
