AJA KONA LH, Installation And Operation Manual

Page: 65 / 100

1
57
KONA LH/LHe Installation and Operation Manual — Using The KONA LH
YUV-RGB Conversion: These pulldowns select industry standard color space and
gamma transfer functions for the YUV-RGB conversion, or allow you to direct
the KONA card to automatically determine it for you.
Colorspace —choose from:
Rec 601
Rec 709
Auto
Gamma —choose from the following:
Linear (1.8)
Rec 601 (2.20)
Rec 709 (2.22)
Auto
Enable Custom LUTs —this checkbox enables a custom color lookup table
(LUT) for use in Final Cut Pro. When checked, there will be a new “Custom
LUT” menu item under the Windows menu in Final Cut. Selecting that item
brings up the KONA LH Control Panel “Custom LUTs” dialog shown below.
Defining a LUT applies it to the KONA LH output. The custom LUT will be
saved with the Final Cut Pro presets.
Note:
Custom LUTs only work with RGB material.
KONA Custom LUTs Dialog
Select a “canned” LUT or
create your own
Click to restore factory defaults
Adjust Gain & Offset sliders to
change color. Changed values
will appear in red in text fields.
You can also enter specific
numbers to explicitly set a value.