AJA KONA LH, Installation And Operation Manual

Page: 51 / 100

1
43
KONA LH/LHe Installation and Operation Manual — Using The KONA LH
Input Screen
KONA LH Control Panel, Inputs Tab
On the Inputs screen you can view the currently selected video and audio input
sources and map audio sources to the channels supported by Final Cut Pro (more on
this later). Two information panes in the screen are provided: Video Input and Audio
Input.
Input Screen Settings
Video Input
—These radio buttons allow you to see and change what’s currently
selected and the video format that KONA LH has detected there (if any). If you
wish to select a different input you can do so by clicking a different radio button.
If Analog is selected, then you also need to select the Analog Format via a
pulldown menu. Choices are:
Composite
Y/C
Component (SMPTE/EBU N10)
Component (Beta)
Audio Input
—This pulldown menu allows you to pick where the audio comes from.
KONA LH supports up to 8 channels of embedded digital audio, so you can
choose out of the 16 channels that can be embedded in SDI, and pick which to
bring in (from the group 1-8 or 9-16). Since Final Cut Pro currently only
supports two channels of audio, here you can also select which two channels from
the 8 embedded will be mapped to Final Cut’s two channels.
Click a Tab to
Select a Screen.
Click to Select
an Input
Click Arrows to
View Left or Right
Tabs