KONA IP Transport, Capture, Display v16.0r1 28 www.aja.com
Follow Input
Enabling the Follow Input checkbox allows the Control Panel Buffer to auto-
switch to whatever is the detected input format. This feature works only if the
controlling application supports input-based capture—AJA Control Room for
example.
NOTE: In ST 2110 mode, the Follow Input setting must be set correctly for proper
operation. See
"AJA Control Panel ST 2110 Mode Follow Input Settings" on page
Input Select Screen
On the Input Select Screen, you can view the currently selected video and audio
input sources and map audio sources to the channels supported by your editing
application.
Video Input
Source
Select the Video Input source. Choose from IP 1 or IP 2.
SDI Color Sp
Sets the color space. Select from Auto, YUV, or RGB.
SDI RGB Rng
Sets the RGB range. Select from Auto, SMPTE, or Full.
Audio Input
Select
All 16 embedded audio channels (if present) are selected for input.
