background image

KONA Capture, Display, Convert v15.2 27 www.aja.com

 

Color Meanings

All items in the AJA Control Panel block diagram are color-coded to show what is 

happening in real time. This applies to both icons and text. These colors indicate:

Blue

Video is same format as the Primary Format (framebuffer)

Green

Indicates that KONA is performing an active change to the video making it 

different from the Primary Format (e.g., down-conversion).

Yellow

Reference video (black burst or other reference source)

Red

The selected operation cannot be performed

Input/Output Icons

The input and output icons are triangles that together with their color show all 

the input and outputs and their status (selected, not selected, input present or 

not, format, etc.). A complete video path is shown when inputs and outputs are 

connected with lines going to/from the framebuffer. 

Figure 22.  Input/Output Icons

Framebuffer

The framebuffer is the “engine” where your third-party applications interface 

with the AJA device. The framebuffer has a format (called the “Primary Format”) 

and color space that it follows, as defined in the linked menu screens or via 

external application software. The “Secondary Format” is a selection for format 

conversion.

Primary Format

The Primary Format is the media format written to disk and used in your project. 

This is the format that the framebuffer will use and is shown in the Control Panel 

using the color blue. It is the format that the third-party application software will 

either receive from the AJA hardware, or is sending to the hardware. All icons in 

blue are the same as the Primary Format used by the framebuffer. Also any text 

descriptions in the block diagram that appear in blue indicate that something is 

in the primary format. For example:

•  If the input and output icons are blue, you know that the same format is used 

throughout the video path. No format conversion is being performed. 

•  If the input or output icon colors differ (blue input and green output icons for 

example), you know that a format conversion is being performed. 

Summary of Contents for KONA 4


























































































Reviews: