AJA KONA 4 Installation And Operation Manual Download

Page: 21 / 89

KONA Capture, Display, Convert v15.2 21 www.aja.com

3. Connect the 9-pin machine control cable on the supplied breakout cable to

your VTR’s RS-422 control port.

4. Connect two SDI cables between KONA 4 and your digital VTR, one

from KONA 4 SDI In to the VTR SDI Out, and one from KONA 4 SDI Out

(1 or 2) to the VTR SDI In. The KONA 4 SDI connections have embedded

audio (16-channels) so the VTR must be configured accordingly. These

connections will be made via the small DIN 1.0/2.3 sleeve connectors to full

size BNC cable or via the optional K3G-Box.

5. If you have an AES/EBU-ready audio monitoring system, then connect up to

eight channels of AES/EBU output from KONA 4’s BNC connectors: 1/2, 3/4,

5/6, and 7/8, to the monitoring system AES/EBU inputs. (Sixteen AES audio

channels are available when connected to the optional K3G-Box).

K3G-Box for KONA 4

The optional K3G-Box for KONA 4 offers convenient connector access and

additional functionality, and can be easily rack mounted or placed on top of a

broadcast monitor or editing desk.

Figure 16. K3G-Box Model Breakout Box (front view)

RS422

Machine

Control

Longitudinal

Time Code

(LTC)

External

Reference

(loop)

Video Monitor Out

Component/

Composite

Video Output

Analog Audio

Output

AES/EBU Audio In

Channels 1 through 16

All AES/EBU audio connectors have two channels

per connector

SDI Ports 1 through 4

AES/EBU Audio Out

Channels 1 through 16

HDMI

Out

Figure 17. K3G-Box Model Breakout Box (rear view)

HDMI Output

from KONA 4

Mini-HDMI connector

SDI Ports

1 through 4

KONA 4

Host

Connector

KONA 4 to K3G-Box Connections

Connectors on the standard cable set are labeled for their function for easy

installation and maintenance. Connectors on the optional K3G-Box (breakout

box) are similarly labeled. Connect the K3G-Box to the KONA 4 card using the

provided adaptor cables.

• A multi-pin host connector attaches the K3G-Box to the KONA 4 card, using

the provided multi-pin cable.

• Four full size 3G-SDI BNC connectors on the K3-Box rear panel connect

to the KONA 4 card's four SDI connectors with the provided DIN to BNC

adapter cable. These signals are routed to the K3-Box's four front panel SDI-

Summary of Contents for KONA 4


























































































Search results

Summary of Contents for KONA 4

Reviews:

Related manuals for KONA 4

Brands by name

Popular brands

AJA KONA 4, Installation And Operation Manual

Search results

Summary of Contents for KONA 4

Reviews:

Related manuals for KONA 4

Brands by name

Popular brands