KONA Capture, Display, Convert v15.2 13 www.aja.com
NOTE: KONA 1 uses on-card connectors only. No breakout cable or breakout box is
available.
• The KONA 1 endplate provides three full-size BNC connectors:
• Reference/LTC input (top)
• 3G-SDI input (middle)
• 3G-SDI output (bottom)
• Most 3G-SDI formats supported (see
"KONA 1 Tech Specs" on page 77
for a
complete listing
• Up to 16-Channels of Embedded SDI audio in
• Up to 16-Channels of Embedded SDI audio out
• Mini PCIe form factor
• Genlock with reference input
• LTC input
• Internal HD/SD Hardware Downstream Keyer
• RS-422 machine control (9-pin) using RS-422 SMPTE (Sony) protocol
NOTE: A Low Profile version of the KONA card with the same functionality is available
for developers.
AJA Control Panel User Interface For KONA 1
Figure 10. KONA 1 AJA Control Panel Screen Example
The AJA Control Panel application provides an easy to use graphical user interface
for configuration control. See
"AJA Control Panel User Interface" on page 25
for
detailed information.
AJA Software & Utilities
AJA’s KONA software and hardware were developed for powerful integrated
video/audio capture, editing, and production with a variety of 3rd-party
software. With KONA and a qualified computer, you have the ultimate system
for production, post-production, broadcast, and streaming work. AJA software
is distributed as a unified package which includes all the software, firmware,
plugins, and utility programs for AJA’s Io, KONA, and T-TAP products.
Four retail packages are available, one for Mac, one for Windows, and two for
Linux (one package for Ubuntu, one package for Red Hat/CentOS).
