1
43
KONA 3 Installation and Operation Manual — Using The KONA 3 Control
Timing
(
Horiz
and
Vert
)—these two pull-downs allow output timing adjustment with reference
to the Ref Video source selected. The Horizontal reference can be adjusted by selecting a
number of pixels (clocks) to offset. Vertical can be adjusted by specifying a number of lines to
offset.
Formats Screen
The Formats screen shows the video format currently in use by the KONA 3 framebuffer (called
the
Primary Format
) and allows you to change it. All throughout the Control Panel, choices are
always presented based on what KONA 3 can do with the signals available and the inputs/
outputs selected. For example, on the Formats screen, if the output or inputs are a different
format than the primary, then you’ll see an additional information pane that allows you to view
and edit the secondary format—including control over whether up/down/cross conversion is
employed.
KONA 3 Control Panel, Formats Screen
