AJA KiPRO quad Installation & Operation Manual Download Page 16

Page: 16 / 99

www.aja.com

Ki Pro Quad v5.2r3

Figure 3. Ki Pro Quad Connectors

Connections

• HD/3G-SDI Inputs and Outputs 1-4, with 8-channel embedded audio (8x BNC)

• HD-SDI Monitor Output (1 BNC) with embedded audio.

• HDMI v1.4a Monitor Output for monitoring video with embedded audio

• LTC Input (BNC)

• Reference Input for connection to a stable source of genlock video or sync.

• 2 channel balanced analog audio Inputs (2x XLR)

• Line/Mic Level Switch (analog XLR audio input level)

• 10/100/1000 Ethernet LAN

LTC Timecode Input

One BNC provides connection to the house LTC timecode generator or source. This
connection is high impedance.

SDI Input and Outputs

Eight BNC connectors are provided for inputs and outputs supporting HD/3G-SDI video
and embedded 24-bit digital audio.

HDMI

One HDMI connector provides for monitor output of HDMI compatible video (version
1.4a) and multi-channel embedded audio. HDCP is not supported on the output. The
HDMI output supports standard HDMI cables only.

HDMI formats supported:

720p 50, 720p 59.94, 720p 60

1080i 25, 1080i 29.97, 1080i 30

1080p 23.98, 1080p 24, 1080p 25, 1080p 29.97, 1080p 50, 1080p 59.94

Summary of Contents for KiPRO quad




































































































Search results

Summary of Contents for KiPRO quad

Reviews:

Brands by name

Popular brands

AJA KiPRO quad, Installation & Operation Manual

Search results

Summary of Contents for KiPRO quad

Reviews:

Brands by name

Popular brands