AJA Ki PRO ULTRA Installation & Operation Manual Download Page 86

Page: 86 / 98

Ki Pro Ultra v1.2r1

www.aja.com

Chinese Compliance Statement

This product has been tested to the following Chinese standards:

GB13837-2012, GB8898-2011, and GB17625.1-2012

This product meets the requirements of implementation rules for compulsory
certification (REF NO. CNCA-C08-01:2014) under certificate number 2016010805842057.

Translated Warning and Caution Messages

The following caution statements, warning conventions, and warning messages apply to
this product and manual.

Before Operation Please Read These Instructions

Warning!

Read and follow all warning notices and instructions marked on the product or
included in the documentation.

Avertissement !

Lisez et conformez-vous à tous les avis et instructions

d'avertissement indiqués sur le produit ou dans la documentation.

Warnung!

Lesen und befolgen Sie die Warnhinweise und Anweisungen, die auf dem

Produkt angebracht oder in der Dokumentation enthalten sind.

¡Advertencia!

Lea y siga todas las instrucciones y advertencias marcadas en el

producto o incluidas en la documentación.

Aviso!

Leia e siga todos os avisos e instruções assinalados no produto ou incluídos na

documentação.

Avviso!

Leggere e seguire tutti gli avvisi e le istruzioni presenti sul prodotto o inclusi

nella documentazione.

Summary of Contents for Ki PRO ULTRA



































































































Search results

Summary of Contents for Ki PRO ULTRA

Reviews:

Brands by name

Popular brands

AJA Ki PRO ULTRA, Installation & Operation Manual

Search results

Summary of Contents for Ki PRO ULTRA

Reviews:

Brands by name

Popular brands