Ki Pro Ultra 12G File Based Recorder/Player v1.0 39 www.aja.com
16.2 Format Media
This parameter is used to format the currently selected media using the file
system type selected in the previous menu.
CANCEL (default)
Format Media
No action (do not format the media selected)
Format the selected media: press Control Knob and CONFIRM
ACTION to Format the media)
16.3 Delete Clips
This parameter can be used to delete all of the clips in the AJA folder on the
media.
KEEP CLIPS (default)
DELETE CLIPS
No action (do not delete clips)
Press Control Knob and CONFIRM ACTION to Delete all clips on
the storage device
NOTE: Ki Pro Ultra 12G media can be used to hold any data file. If other files are saved to
the media, placing them outside of the “AJA” folder will prevent them from being
deleted if a MEDIA>Delete Clips>DELETE ALL is performed.
16.35 Delete Current Clip
This parameter can be used to delete the currently selected clip on the media (see
the bottom display for clip name).
KEEP CLIPS (default)
DELETE SELECTED CLIP
No action (do not delete the selected clip)
Press Control Knob and CONFIRM ACTION to Delete this clip from
the storage device
17.0 Preset Reel Name
This parameter determines the reel name associated with all clips generated
while using this setting.
001 to 999
(default = 001)
Press Control Knob and scroll up or down to change the Reel
Name value from 001 to 999.
The reel name is a number between 001 and 999. It is historically linked to the
naming conventions used for film and tape-based media. The Reel Name is
an incrementing three digit value that works with EDLs. For this reason, the
parameter does not have a “NONE” selection—all clips will be associated with a
Reel Name. The Reel Name parameter determines the name that the media will
have if it is formatted and will appear when the media is mounted on a computer.
17.1 Unit Designation
This parameter defines a letter designation for recordings when using the 17.7
Combined Name menu parameter.
• A to Z – Selects a value between A and Z
NOTE: The Unit name is not part of a clip name unless the 17.7 Combined Name
menu parameter is enabled.
SELECT A USER
DESIGNATION LETTER
Press Control Knob and scroll to the desire alphabetic letter (A –
Z) your unit designation. Press the knob again to select.
