![AJA IPR-10G2-HDMI Installation And Operation Manual Download Page 37](http://html.mh-extra.com/html/aja/ipr-10g2-hdmi/ipr-10g2-hdmi_installation-and-operation-manual_2883369037.webp)
10 GigE IP Mini-Converters SMPTE 2110 IP Transmit/Receive v2.2r1 37 www.aja.com
Figure 31. IPT-10G2-SDI Config Screen 1 of 3
Menu
Status
Config
Presets
Network
Firmware
Alarms
None
JGIPT10G2SDI
Config Page
System Name
JGIPT10G2SDI
User Authentication
Disabled
Identify LED
Off
UPnP Host
Enable
IGMP Version
V3
PTP Domain
0
PTP Preferred Grandmaster ID
none
PTP Grand Master Capable
Disabled
Video Dest IP Address 1
239.1.188.1
Video Destination Port 1
10000
Video Source Port 1
10000
Audio Dest IP Address 1
239.2.188.1
Connection
Serial Number
ENG003
Software Version
2.1.0.40d
Connection Status
Connected
Network
CY IPT10G2SDI
CYIPR10G2HDMI
CYIPT10G2HDMI
GCIPR10G2SDI
GCIPT10G2SDIE…
IPR10G1PR030114
IPR10G1PR030310
IPR10GENG010
IPT10G2SDIENG…
JGIPR10GHDMI
JGIPR10G2HDMI
JGIPT10G2SDI
System Name
Defines a name for the system and gives it a unique identifier. This name is used
when displaying systems through the web interface.
User Authentication
Enable or disable user password authentication for the web interface.
Identify LED
Enables flashing of the Ethernet LEDs on the unit.
UPnP Host
Enable or disable network discovery using Universal Plug and Play.
IGMP Version
Select the Internet Group Management Protocol Version. AJA supports IGMP v2
and v3.
NOTE: It is important to know which version of IGMP is in use on your network.
Selecting the wrong IGMP version may cause long delays in processing multicast
subscriptions. See your network engineer for more information.
PTP Domain
NOTE: Applicable only if PTP is selected for Video Output Clock Selection.
The PTP Domain field is for the ID of the PTP Source Port. While it is possible
that there could be multiple PTP domains, most implementations will use "0". If
unsure, consult with your network administrator. Possible values range from 0 to
127.