AJA io hd, Installation And Operation Manual, Page: 42 / 110

32
Typical System Connections
Typical Analog System
System interconnections for a system with analog A/V sources are shown on the
previous page. Your system may differ depending on VTRs, audio monitoring, and
video monitoring.
1. If desired, connect your house reference sync to the Io HD Ref input
connector (BNC). The Io HD Ref output connector can be connected to
your VTR.
Note: The Ref Output connector is not a loop-through—the input is terminated
internally and buffered to the output. Both input and output Ref connections are
75 ohm.