AJA io hd, Installation And Operation Manual, Page: 17 / 110

1
1
\
Chapter 2:
Controls and Indicators
2
LTC SDI 1
In 1 In 2 In 3 In 4 Out 1 Out 2 Out 3 Out 4
In
Out
In
Out
In
Out
In
Out
In
Out
In
Out
SDI 2 Y/G Pb/B Pr/R
HDMI Out HDMI In RS-422
100-240VAC
50/60Hz .4A
Audio
Mon
AES 1/2 AES 3/4 AES 5/6 AES 7/8
S-Video CVBS Ref
Controls and Indicators
When installing the AJA Io HD system, you’ll make media cable connections to a
variety of equipment. After installation, the front panel indicators will be useful in
monitoring what is happening on the system as well as troubleshooting problems
that can occur. Becoming familiar with the Io HD front and rear panels will
simplify installation, setup, and operation of the system.
On the following pages are front and rear panel illustrations with notations that
summarize all of the connectors and indicators. Detailed descriptions of each of the
connectors and indicators follow afterward.
Full installation instructions are provided in Chapter 4 later in this manual. Be sure
to read that chapter before attempting to install the product.
Note: The AJA Io HD should be plugged into a 3-prong AC power jack before
you make connections to other equipment — although it should not be switched
on. The AC cord provides a path to ground for accidental static discharge and
protects system equipment.