www.aja.com
82
FS4 Frame Synchronizer/Converter v1.1
3 Frame Delay
This parameter adjusts Video Processor output timing.
NOTE:
This delay amount is in addition to the FS4’s default video latency. In Four Channel Mode and
in Single Channel Mode with no Ultra-HD/4K up or down conversion, this default latency is
nominally two frames at low frame rates (23.98/24/25/29.97/30 fps) or four frames at high
frame rates (50/59.94/60 fps). In Single Channel Mode with UltraHD/4K up or down
conversion being performed this default latency is nominally 3 frames at low frame rates or
five frames at high frame rates.
TSTGEN Menu Group
IMPORTANT:
In Four Channel Mode, the settings in this menu group apply only to the selected Video
Processor (VID1- VID 4).
1 Test Pattern Gen
This parameter turns selects whether test pattern is output by that Video Processor.
NOTE:
Normal output can be a version of its currently selected input, a Sidebar or Letterbox display,
Black, or a Freeze of last good video, depending on the current configuration.
2Kx1080p23.98, 2Kx1080p24
0
2749
-562
562
2Kx1080p25
0
2639
-562
562
2Kx1080p29.97, 2Kx1080p30
0
2199
-562
562
2Kx1080p50
0
2639
-562
562
2Kx1080p59.94, 2Kx1080p60
0
2199
-562
562
525i59.94, 525psf29.97
0
857
-262
262
625i50, 625psf25
0
863
-312
312
720p23.98, 720p24
0
4124
-375
375
720p25
0
3959
-375
375
720p29.97, 720p30
0
3299
-375
375
720p50
0
1979
-375
375
720p59.94, 720p60
0
1649
-375
375
Table 10. Output Timing Ranges (continued)
Output Frame Rate
Horizontal
Vertical
Min
Max
Min
Max
Variable
Adjustment output timing from 0 to 6 frames in one frame
increments.
Default: 0
Off (default)
On
Normal video is output (no test pattern).
The output is the test pattern generator.