FS2 Frame Synchronizer/Converter v3.0 66 www.aja.com
11.1 Proc Amp Gain
This parameter adjusts the video gain from 0 to 1.5 times luma in 0.01 steps
Variable
Adjusts Proc Amp Gain from zero to 1.5 in.01 steps.
Default (unity):
1.0
11.2 Proc Amp Black
This parameter adjusts the video black level from -20 IRE to +20 IRE in 0.5 steps.
Variable
Adjusts Proc Amp Black level from -20 IRE to +20 IRE in 0.5 steps.
Default (unity):
0 IRE
11.3 Proc Amp Hue
This parameter adjusts the video color hue through 360 degrees (color wheel) in
1 degree steps.
Variable
Adjusts Proc Amp Hue from -179 to +180 in steps of 1 degree.
Default (unity):
0 degrees
11.4 Proc Amp Sat
This parameter adjusts the video color saturation from black and white to 1.5
times chroma in steps of 0.01.
Variable
Adjusts Proc Amp Saturation from 0 (black & white) to 1.5 (Chroma)
in steps of 0.01.
Default:
1.0
Color Corrector (RGB)
12.0 Color Corrector (RGB)
This parameter turns the RGB Color Corrector On and Off. When it is On, you can
set additional parameters (12.1 to 12.9) to control RGB video Gain, Black Level, and
Gamma. When set to Off, all RGB Color Corrector settings are programmed for
unity (or bypass).
Off (default)
On
Sets the RGB Color Corrector to Off.
Sets the RGB Color Corrector to On, enabling parameters 12.1-12.9.
Source Memory
RGB Color Corrector values are independently kept for each separate input: SDI 1,
SDI 2, Fiber 1, Fiber 2, Composite, HDMI, and Component.
12.1 Color Red Gain
This parameter adjusts the RGB Red Gain.
Variable
Adjusts Red Gain from zero to 1.5 in 0.01 steps.
Default (unity):
1.0