BRIDGE LIVE Video I/O and Streaming Appliance v1.12 110 www.aja.com
Factory Reset
WARNING:
Before performing a factory reset, be sure to backup your Pipeline
configurations. See
"Creating and Loading Preset Configurations for Streams" on
for more information.
CAUTION:
A factory reset will revert the login credentials back to how they were set at
the time of shipment from the factory. You will need to reference your Quick Start
Guide for these original login credentials; otherwise you will need to contact AJA
Tech Support.
Performing a factory reset will restore BRIDGE LIVE to its factory settings. All
pipelines and settings, including network setup and passwords, will revert to
default factory settings. Only your current licenses will be preserved. Once
changes are applied, the server will restart itself and boot into the factory state.
The process takes approximately one minute.
Factory Reset
There are several methods for performing a Factory Reset to BRIDGE LIVE.
• The first method is to use the web UI (Setup > Version Management > Perform
factory reset button).
• The second method is to select factory reset from the menu that automatically
displays briefly during the booting up process.
• The third method is to use a command line interface (CLI).
Web UI Method
To perform a factory reset using the web UI:
1. From the Setup menu in the upper right area, select Version management.
The Version management page displays.
Figure 171. Accessing the Version Management page
Figure 172. Version management page
