manualshive.com logo in svg

AJA BRIDGE LIVE, Installation And Operation Manual

Share
Download
AJA BRIDGE LIVE Installation And Operation Manual Download Page 103

BRIDGE LIVE Video I/O and Streaming Appliance v1.12 103 www.aja.com

 

Figure 157.  The Licensing menu

The Licenses page displays. 

Figure 158.  The Licenses page

2.  Click the downward pointing disclosure triangle to display your License 

Package details for your previously installed License Package. 

Figure 159.  The Licenses page displaying previously installed License Package

3.  Click the red “X” icon to the right of the currently installed License Package 

to remove it. 

4.  Next, with no License Package present, click 

Load license file

. A navigation 

window opens. 

5.  Navigate to your new License Package location, choose the file, and select 

Open

. The new License Package will install. 

Contacting AJA Technical Support

Email: 

[email protected]

Phone: +1-530-271-3190
Fax: +1-530-274-9442
Web: 

https://www.aja.com/support/contact

Shipping: 180 Litton Dr. Grass Valley, CA 95945 USA 
With the Installation ID in hand, contact AJA Support. AJA Support will assist 

you with placing your order for an additional license. You will receive the license 

through an email attachment or download link. Download the license file to a 

place that is accessible to you through the BRIDGE LIVE web UI. 
Next, navigate to the License page by clicking 

Licensing

 in the upper right area 

of Dashboard. 

Summary of Contents for BRIDGE LIVE












































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands