manualshive.com logo in svg

AJA BNDI-3G16-R0, Installation And Operation Manual

Share
Download
AJA BNDI-3G16-R0 Installation And Operation Manual Download Page 86

BRIDGE NDI 3G Conversion Gateway Appliance v1.0 86 www.aja.com

 

Appendix B – Safety and Compliance

Federal Communications Commission (FCC) Compliance Notices

Class A Interference Statement

This equipment has been tested and found to comply with the limits for a Class 

A digital device, pursuant to Part 15, Subpart B of the FCC Rules. These limits 

are designed to provide reasonable protection against harmful interference 

in a residential installation. This equipment generates, uses, and can radiate 

radio frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications. However, 

there is no guarantee that interference will not occur in a particular installation. If 

this equipment does cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following 

measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

FCC Caution

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) This device may not cause harmful interference, and 

(2) this device must accept any interference received, including interference that 

may cause undesired operation.

Canadian ICES Statement

Canadian Department of Communications Radio Interference Regulations
This digital apparatus does not exceed the Class A limits for radio-noise emissions 

from a digital apparatus as set out in the Radio Interference Regulations of 

the Canadian Department of Communications. This Class A digital apparatus 

complies with Canadian ICES-003.
Règlement sur le brouillage radioélectrique du ministère des Communications
Cet appareil numérique respecte les limites de bruits radioélectriques visant les 

appareils numériques de classe A prescrites dans le Règlement sur le brouillage 

radioélectrique du ministère des Communications du Canada. Cet appareil 

numérique de la Classe A est conforme à la norme NMB-003 du Canada.

European Union and European Free Trade Association (EFTA) 

Regulatory Compliance

This equipment may be operated in the countries that comprise the member 

countries of the European Union and the European Free Trade Association. These 

countries, listed in the following paragraph, are referred to as The European 

Community throughout this document:
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, 

FINLAND, FRANCE, GERMANY, GREECE, HUNGARY, IRELAND, ITALY, LATVIA, 

LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, POLAND, PORTUGAL, 

ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, UNITED KINGDOM, ICELAND, 

LICHTENSTEIN, NORWAY, SWITZERLAND

Summary of Contents for BNDI-3G16-R0



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands