![AJA BNDI-3G16-R0 Installation And Operation Manual Download Page 62](http://html.mh-extra.com/html/aja/bndi-3g16-r0/bndi-3g16-r0_installation-and-operation-manual_2883230062.webp)
BRIDGE NDI 3G Conversion Gateway Appliance v1.0 62 www.aja.com
Single Channel NDI-SDI Converters
Single NDI-SDI Converter connections may differ based on the brand and model.
Individual user manuals should be consulted when connecting to the Bridge via
your NDI network.
If your Media network switch is set to DHCP, then you should see the Bridge
system/source information become available for subscription on the Source List
page and now can be selected as an NDI-to-SDI source.
If your Media switch is set to Static, you may need to connect the converter to
your Control Network first in order to change the converter's default IP address to
a new one that is compatible with your Media network.
NewTek Connect Spark Plus I/O
STEPS:
1. Input IP address for converter and login to device.
2. Select the Decoder Tab.
3. Select the BRIDGE NDI 3G from the Source List under the Device Name
options.
4. Select the desired Channel from the Channel Name list.
5. Connect the SDI output of the converter to an SDI monitor or capture
device.
6. Observe Bridge NDI Ch is now active on SDI monitor or capture device.