manualshive.com logo in svg

AJA BNDI-3G16-R0, Installation And Operation Manual

Share
Download
AJA BNDI-3G16-R0 Installation And Operation Manual Download Page 43

BRIDGE NDI 3G Conversion Gateway Appliance v1.0 43 www.aja.com

 

Source/Destination Screen

Figure 42.  Viewing the Source/Destination Screen

Use the Source/Destination screen to get organized, to look at what is on your 

network and to see what is actively mapped from/to SDI Channels and/or Groups. 

This can be a useful place to determine which NDI sources you want to subscribe 

to, and it provides intuitive channel configuration. 
The Source/Destination Screen is split into two different sections. The upper 

section, "Active Mapping," and the lower section, "NDI Network."

Active Mapping

The Active Mapping section of the Source/Destination Screen provides a 

mapping of the signals that are coming in and going out of BRIDGE NDI 3G. It 

indicates the direction and signal type for each of the 16 channels. 
The attributes for sources/destinations are shown across the following columns:

Column Name

Definition

Active

Indicates whether the channel/group has an active signal or 

not

Engine

Indicates Engine (A or B)

Bank

Indicates Bank number

Ch

Displays the physical channel number for the SDI connectors

Type

Shows the SDI Channel type

Summary of Contents for BNDI-3G16-R0



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands