AJA BNDI-3G16-R0 Installation And Operation Manual Download Page 26

Page: 26 / 98

BRIDGE NDI 3G Conversion Gateway Appliance v1.0 26 www.aja.com

Figure 20. The I/O Screen Showing part of Bank 1 (Channels 01 and 02) and

part of Bank 3 (Channels 09 and 10) as a Video + Key Configuration

NDI to SDI Decoding

If the system will be devoted to receiving incoming NDI from the NDI Network

and decoding to SDI for output from the rear of Bridge NDI, then all SDI

connections to BRIDGE NDI 3G will be 3G-SDI Destinations such as switchers,

routers, ingest servers, and edit bays.
Consider how each Bank will be used, i.e., as individual HD Channels, 4K/UltraHD

Groups, Video + Key Groups, or some combination thereof.
Most of the controls described above for SDI to NDI encoding are essentially the

same when using them for NDI to SDI decoding.

Summary of Contents for BNDI-3G16-R0



































































































Search results

Summary of Contents for BNDI-3G16-R0

Reviews:

Brands by name

Popular brands

AJA BNDI-3G16-R0, Installation And Operation Manual

Search results

Summary of Contents for BNDI-3G16-R0

Reviews:

Brands by name

Popular brands