AJA BNDI-3G16-R0 Installation And Operation Manual Download Page 22

Page: 22 / 98

BRIDGE NDI 3G Conversion Gateway Appliance v1.0 22 www.aja.com

SDI to NDI Encoding for HD Channels

To configure a Bank for HD, select the Video Setup tab on the Control Bar along

the lower area of the interface. The Bank Configuration buttons display.

Figure 12. Selecting the Video Setup Tab

Select HD from the Bank Configuration drop-down menu.
With the Video Setup tab selected, the Bank Configuration buttons also display

on the I/O Screen. You can make Bank Configuration selections from either the

Video Setup tab in the Control Bar or from the I/O Screen.
If the Video Setup tab is not selected, the Bank Configuration buttons will not

display on the I/O Screen.

Figure 13. After the Video Setup Tab is selected, the Bank Configuration

buttons become available from both the Video Setup tab as well as the

I/O Screen

This will allow selection of HD, V+K, or 4K mode. Each Video Tile represents an HD

signal from each 3G-SDI connection that is being used to feed or receive the HD

signal using that specific Bank.

Summary of Contents for BNDI-3G16-R0



































































































Search results

Summary of Contents for BNDI-3G16-R0

Reviews:

Brands by name

Popular brands

AJA BNDI-3G16-R0, Installation And Operation Manual

Search results

Summary of Contents for BNDI-3G16-R0

Reviews:

Brands by name

Popular brands