10 GigE IP Mini-Converters SMPTE 2110 IP Transmit/Receive v2.1 39 www.aja.com
NOTE: The Test Pattern is supported only in 1080p and 1080i formats.
Audio Signal Generator
You can output a test audio signal to validate audio signal connections. Select Off
or 400 Hz Tone.
Off -
No audio signal is generated.
400 Hz Tone -
A 400 Hz tone is generated on both channels of a pair and sent
to the analog RCA audio outputs. Each channel pair is at a different volume.
Channel pair 1/2 is the loudest. Channel pair 7/8 is the softest.
Audio Delay
Use the Audio Delay control as needed to synchronize audio and video signals.
0 to 100 Milliseconds -
Use the slider control with a mouse or the right and left
arrow keys on your keyboard to adjust the audio delay setting.
HDMI Audio Mode
Determine how you want the HDMI audio to function. It can auto-detect which
channels are carrying the audio (either Channels 1-2 or Channels 1-8), or you can
manually select which channels will carry audio. Select one of the following:
• Auto
• Channels 1-2
• Channels 1-8
Analog Audio Channels
Select which pair of analog audio channels you want to go out through the
analog RCA audio outputs. Choose one of the following:
• Channels 1 & 2
• Channels 3 & 4
• Channels 5 & 6
• Channels 7 & 8
NMOS Enable
Enable or disable network discovery for the device.
Ember+ Enable
Enable or disable network discovery for the device.
