HELO Plus H.264 Streaming and Recording Encoder v1.0 35 www.aja.com
WARNING:
CIFS/SMB1.0 is not secure and should be avoided if at all possible. Use
of CIFS/SMB1.0 may expose sensitive user credentials to anyone listening on
your network.
Select from the following options:
• Auto (default)
• SMB 3.0
• SMB 2.1
• SMB 2.0
• SMB 1.0
SD Card/USB Record Path
Defines a path (or directory name) for the primary recording location on an SD
card or USB stick. Recordings will always be placed inside an /AJA directory.
Factory default is "Empty".
Use forward slashes to create paths for subdirectories. For example, to create the
path: "AJA/project_name", enter the following into the SD Card/USB Record Path
field:
/project_name
NOTE: Primary and secondary recordings cannot be assigned to the same media.
Secondary Recording Media Type
If creating a secondary recording, use this control to select whether secondary
recordings go to SD Card or USB storage.
None -
Select "None" when not creating a secondary recording (factory default).
SD -
Record secondary recording to the media inserted into the SD Card slot.
USB -
Record secondary recording to the media connected to the standard size
USB Storage port.
Secondary SD Card/USB Record Path
Defines a path (or directory name) for the secondary recording location on an
SD card or USB stick. Recordings will always be placed inside an /AJA directory.
Factory default is "Empty".
Use forward slashes to create paths for subdirectories. For example, to create the
path: "AJA/project_name", enter the following into the SD Card/USB Record Path
field:
/project_name
Dropped Frames Record Behavior
Selects the HELO Plus’s behavior when frames are lost due to errors.
Continue -
Recording continues if dropped frames occur (factory default).
Stop -
The recording stops if a frame is dropped.
Filename Prefix
Sets the prefix of the file name, which will be appended with the Segment
Numbers specified below. UTF-8 (international) characters are supported.
The factory default prefix is "<Unit Serial #>_Clip". The Unit Serial# is also
displayed on the right hand side of the UI window.
NOTE: When Filename Prefix is set to the factory default, HELO Plus automatically
adds a unique device serial number to all clip filenames, to help ensure all clip
filenames are unique.
