57
58
SPRING APPLICATION POSITION
SPEAKER DISASSEMBLY INSTRUCTIONS
82-ZM1-322-019
SPR-T,FR 60
82-ZM1-259-110
SPR-T,PINCH R
82-ZM1-265-119
SPR-E.TRIG
82-ZM1-255-319
SPR-E,LER DIR
82-ZM1-258-110
SPR-T,PINCH L
82-ZM1-213-019
SPR-T,HEAD
82-ZM1-269-219
SPR-T,BRG
82-ZM1-214-010
SPR-T,DIR
82-ZM1-285-310
SPR-C,BT L
82-ZM1-219-119
SPR-T,LINK
82-ZM1-257-019
SPR-T,CAS
82-ZM1-218-019
SPR-E,HB
82-ZM1-244-410
SPR-C,BT
Insert a flat-bladed screwdriver into the position indicated by
the arrows and remove the panel. Remove the screws of each
speaker unit and then remove the speaker units.
Remove the grill frame and four pieces of rubber caps by pulling
out with a flat-bladed screwdriver. Remove the screws from hole
where installed rubber caps. Insert a flat-bladed screwdriver into
the position indicated by the arrows and remove the panel. Re-
move the screws of each speaker unit and then remove the speaker
units.
Type.1
Type.3
Type.2
TOOLS
1
Plastic head hammer
2
(-) flat head screwdriver
3
Cut chisel
How to Remove the PANEL, FR
1. Insert the (-) flat head screwdriver tip into the gap
between the PANEL, FR and the PANEL, SPKR.
Tap the head of the (-) flat head screwdriver with the
plastic hammer head, and create the clearance as
shown in Fig-1.
2. Insert the cut chisel in the clearance, and tap the head
of the cut chisel with plastic hammer as shown in
Fig-2, to remove the PANEL, FR.
3. Place the speaker horizontally. Tap head of the cut
chisel with plastic hammer as shown in Fig-3, and
remove the PANEL, FR completely.
Type.4
How to Attach the PANEL, FR
Attach the PANEL, FR to the PANEL, SPKR. Tap the
four corners of the PANEL, FR with the plastic hammer
to fit the PANEL, FR into the PANEL, SPKR
completely.
Insert a flat-bladed screwdriver into the position indicated by
the arrows and remove the panel. Turn the speaker unit to coun-
terclockwise direction while inserting a flat-bladed screwdriver
into one of the hollows around speaker unit, and then remove
the speaker unit. After replacing the speaker unit, install it turn-
ing to clockwise direction untill "click" sound comes out.
Fig-1
Fig-2
Fig-3
All manuals and user guides at all-guides.com
Summary of Contents for CX-NAK772
